Specifications

Solution 2.5-ZC Fireplace Installation and Operation Manual 85
2. Align the notch in the left
end of the tube with the
tab of the left air channel
hole.
3. Insert a cotter pin in the
last hole on the right side
of the tube. Then bend the
tabs on the pin to keep in
place.
4. Repeat steps 1, 2 and 3
for the two tubes in the
back then install the baffle.
Then, install the two front
tubes.
5. To remove the tubes use
the above steps in reverse
order.
Note that secondary air tubes can be replaced without removing the baffle board.