Specifications

78 Solution 2.5-ZC Fireplace Installation and Operation Manual
Appendix 3: Installing the Door Overlay
In order to complete the assembly of your Solution 2.5-ZC wood fireplace, you need to
install the door overlay. See figure below for installation instructions:
Position the overlays (A)
and (B) on the door
frames and secure them
from the inside of the
doors using the 8 included
screws (B).
To facilitate the
installation, do not tighten
the screws until they are
all installed.
Note: It is not necessary
to remove the glass or any
other component to install
the overlay.