Specifications

Solution 2.5-ZC Fireplace Installation and Operation Manual 65
TABLE 3 – LIST OF MANDATORY COMPONENTS
CHIMNEY
MANUFACTURER
MANDATORY COMPONENTS TYPE/BRAND
Selkirk
 Ventilated roof flashing.
 Must have rafter protectors at the
roof level if the chimney is
enclosed at the attic level.
Ultra-Temp (UT), Super
Pro (SPR), Super vent
(JSC), Hart & Cooley
(TLC), Sure-Temp (ST)
Security Chimney
 Rafter protector at the roof level if
chimney is enclosed at the attic
level.
 Requires insulated attic radiation
shield unless chimney is
enclosed at the attic level.
 Requires the use of a 6AW7
(Solid pack 1") adapter for a
ASHT+ of 7".
 Requires the use of a 6AW7 and
a 7UCA adapter for the S-2100 of
7".
1" Solid Pack: ASHT+,
2" Solid Pack : S-2100
Simpson Dura-Vent
 Ventilated roof flashing.
 Rafter protector at the roof level
is chimney is enclosed at the attic
level.
1" Solid Pack : Dura Tech
ICC
 Ventilated roof flashing.
 Rafter protector at the roof level if
chimney is enclosed at the attic
level.
Excel 2100
American Metal
 Chimney cannot be enclosed at
the attic level.
AC Triple wall HS,
AC Triple wall HSS
*Youcangetakitoffour(4)rafterprotector(AC03510)from
your dealer. Each rafter is made  of 22GA galvanized steel
(10.44”Wx5.126”H).
10.44”
5.126”
1.530”
.512”