Specifications

Solution 2.5-ZC Fireplace Installation and Operation Manual 35
PART B – INSTALLATION
Install the fireplace only as described in these instructions and using only components
from the chimney manufacturers listed in table 2.
Parts Required
 SOLUTION 2.5-ZC Fireplace
 Insulated chimney made by the manufacturers listed in table 2, with the corresponding
specifications :
 Chimney lengths
 Elbows (where necessary)
 Associated components as per these installation instructions.
Additional Equipment (optional)
 Forced Air Distribution Kit
 Gravity Kit
 Fresh air kit
 Fire screen
6 Safety Information
6.1 Summary of Installation Cautions and Warnings
• THE INFORMATION GIVEN ON THE CERTIFICATION LABEL AFFIXED TO THE
APPLIANCE ALWAYS OVERRIDES THE INFORMATION PUBLISHED, IN ANY
OTHER MEDIA (OWNER’S MANUAL, CATALOGUES, FLYERS, MAGAZINES
AND/OR WEB SITES).
• MIXING OF APPLIANCE COMPONENTS FROM DIFFERENT SOURCES OR
MODIFYING COMPONENTS MAY RESULT IN HAZARDOUS CONDTIONS. WHERE
ANY SUCH CHANGES ARE PLANNED, STOVE BUILDER INTERNATIONAL INC.
SHOULD BE CONTACTED IN ADVANCE.
• ANY MODIFICATION OF THE APPLIANCE THAT HAS NOT BEEN APPROVED IN
WRITING BY THE TESTING AUTHORITY VIOLATES CSA B365 (CANADA), AND
ANSI NFPA 211 (USA).
• CONNECTION BETWEEN A 2100 INSULATED CHIMNEY AND A LISTED STAINLESS STEEL
CHIMNEY LINER IS ALLOWED IF A LISTED CONNECTOR IS USED. FOLLOW INSTRUCTIONS IN
SECTION8.9FORTHATKINDOFINSTALLATION.