Installation manual

11 
3.3  MAINTAINING YOUR ENERZONE SOLUTION 2.5ZC 
3.3.1 Creosote – Formation and need for removal 
When wood is burned slowly without a flame, it produces tar and other organic vapours 
which combine with expelled moisture to form creosote. The creosote vapors condense in the 
relatively cool chimney flue of a slow-burning fire. As a result, creosote residue accumulates 
on the flue lining. When ignited this creosote makes an extremely hot fire. 
The chimney shall be inspected at least twice a year during the heating season to determine 
when a creosote build-up has occurred. 
When creosote has accumulated it shall be removed to reduce the risk of a chimney fire. 
3.2.2 Chimney Maintenance 
Regular chimney inspection and maintenance combined with proper operation will prevent 
chimney fires. Keep your chimney clean. Do not allow more than 1/16″ creosote build up in 
your chimney. The amount of creosote will depend on variables such as frequency of use and 
type of fire. We recommend that you: 
A.  Initially inspect the chimney system weekly. From this, you will learn how often it 
will be necessary to clean your chimney. 
B.  Have your chimney cleaned by a qualified chimney sweep. If you wish to clean it 
yourself, we recommend using a stiff plastic or non-metallic brush. If a metal brush is 
used, its size should be slightly smaller than the flue to avoid damaging the chimney. 
Do not use a brush that will scratch the stainless steel interior of the chimney. 
C.  Do not expect chemical cleaners to keep your chimney clean. The rain cap can be 
removed for inspection and/or cleaning of the chimney. 
3.3.3  Top Baffle Removal Prior to Cleaning the Chimney 
Before starting to clean your chimney, we recommend that you remove the top baffle to avoid 
creosote dust collection at the top of the baffle. Follow these steps to set the top baffle out of 
the way: 
1.  Remove the front air tube by pulling out the cutter pin on the side of the tube. They are 
located at the top, underneath the baffle. 
2.  Lift the baffle assembly and slide it out of the fireplace. You now have access to the 
chimney. 










