Installation manual
9
IMPORTANT NOTES
A. Do not block the hot air vents to the fireplace as this will cause the fireplace to overheat.
B. Never start a fire using gasoline, kerosene, charcoal lighter fluid or any other combustible
liquid.
C. Do not burn coal. The sulphur in coal will corrode the firebox.
D. Do not burn driftwood which has been in the ocean or salt water. The salt will corrode the
firebox and chimney.
E. Do not abuse the unit by burning paper or cardboard or construction material such as
pressed wood, plywood or lumber.
F. Do not allow the wood to smoulder or burn without flame, since this will produce
excessive creosote in the unit.
2.3 MAINTAINING YOUR ENERZONE SOLUTION 2.5ZC
2.3.1 Creosote – Formation and Need for Removal
When wood is burned slowly without a flame, it produces tar and other organic vapours
which combine with expelled moisture to form creosote. The creosote vapours condense in;
the relatively cool chimney flue of a slow-burning fire. As a result, creosote residue
accumulates on the flue lining. When ignited this creosote makes an extremely hot fire.
The chimney shall be inspected at least twice a year during the heating season to determine
when a creosote build-up has occurred. When creosote has accumulated it shall be removed
to reduce the risk of a chimney fire.
2.2.2 Chimney Maintenance
Regular chimney inspection and maintenance combined with proper operation will prevent
chimney fires. Keep your chimney clean. Do not allow more than 1/16 creosote build up in
your chimney. The amount of creosote will depend on variables such as frequency of use and
type of fire. We recommend that you:
A. Initially inspect the chimney system weekly. From this, you will learn how often it
will be necessary to clean your chimney.
B. Have your chimney cleaned by a qualified chimney sweep. If you wish to clean it
yourself, we recommend using a stiff plastic or non-metallic brush. If a metal brush is
used, its size should be slightly smaller than the flue to avoid damaging the chimney.
Do not use a brush that will scratch the stainless steel interior of the chimney.
C. Do not expect chemical cleaners to keep your chimney clean. The rain cap can be
removed for inspection and/or cleaning of the chimney.