Owner`s manual

28
4.4 Baffle Installation and brick layout for Solution 2.0
All firebrick and vermiculite baffles must be properly in place for correct burning operation. Have any
damaged firebricks replaced. Check the firebricks annually for damage and replace if they are broken or
damaged. See Figure 4.4 for the firebrick layout. Install the side & back firebricks first, and then the bottom
firebricks.
Figure 4.4 – Firebrick layout for Solution 2.0
ITEM PIÈCE # DESCRIPTION QTÉ
1 29020 4 1/2" X 9" X 1 1/4'' REFRACTORY BRICK 7
2 PL36049 4 1/2" X 4 1/2" X 1 1/4'' REFRACTORY BRICK 1
3 29011 4" X 9" X 1 1/4'' REFRACTORY BRICK 2
4 PL36061 4 1/2" X 9" X 1 1/4'' REFRACTORY BRICK (CUT) 2
5 VP00079 4" X 7 1/4" X 1 1/4'' REFRACTORY BRICK 2
6 29001 4" X 8" X 1 1/4'' REFRACTORY BRICK 5
7 PL63012 BRICK HOLDER 2
8 PL63128 FRONT SECONDARY AIR TUBE 1
9 PL63041 CENTRE/REAR SECONDARY AIR TUBE 2
10 30068 1/8’’ X 1 1/2’’ STAINLESS STEEL COTTER PIN 3
11 21219 C-CAST BAFFLE 2