Specifications

42 Solution 1.8 Installation and Operation Manual
Leg kit installation:
4- Secure each leg (A) on support (B) using (2)
washers (C) and (2) nuts (D) supplied in the kit.
Repeat the same mounting procedure for the
second support.
5- Secure both leg support assembly to the underside
of the firebox using the bolts, washers and nuts
removed in step 3. Supports can be installed on
either side.
Note: Insert each bolt from the inside of the firebox,
this will allow the bricks to sit more evenly on the floor
of the firebox.
6- Gently flip the stove back on its legs making sure
not to put too much weight on the rear legs.
7- Open the ash drawer lid then slide it on the left and
right bend of the legs support brackets.
8- Position the stove for its installation and reinstall
the door and the bricks (see Appendix 8:
Exploded Diagram and Parts List for layout).
Note: Make sure that baffle components have not
moved during the leg installation process since a flue
blockage may occur.