Specifications

8
3000775 12.12
4. Electrical Installation
4.1 Electrical Requirements
Power requirements depend on the fan size and they can be found on page 4.
Danger: Turn off electrical power before servicing. Contact with live electric components can
cause shock or death.
Notice: If any of the original wire supplied with the system must be replaced, use similar wire
of the same temperature rating. Otherwise, insulation may melt or degrade, exposing bare
wire.
4.2 Wiring Diagram for RSV 200-315
The connection diagram below shows a single-phase fan connected to a fan speed control and the power
source (see Fig. 9).
 Use2-conductorwireofminimum14AWGwithground.Wiringmustberunoutsidethechimney/stackinexibleor 
rigid metal conduit.
Fig. 9