Owner`s manual

15
INSTALLATION
External Roof-mounted Power Vent System EuropeanHome.com
INSTALLATION MUST BE PERFORMED BY A QUALIFIED INSTALLER, SERVICE AGENCY OR
THE GAS SUPPLIER.
Work with gas components must be performed by a licensed plumber or gastter within the
Commonwealth of Massachusetts.
Electrical work must only be performed by a qualied, licensed electrician. Electric power must be turned
o when making connections or performing any service.
Note
The PV-GS-SGV-01 must be installed between the shuto valve and the replace gas control valve in such a way as to ensure
proper gas ow into the replace. Do not place the PV-GS-SGV-01 inside the combustible material zone around the replace. The
PV-GS-SGV-01 must be connected to the electric supply with appropriately sized, armored electrical cable or conduit.
Note ow of gas.
Threaded for conduit
connector.