Specifications

Symbol legend
The following terms are used throughout this manual to bring attention to the presence of potential hazards
or to important information concerning the product.
DANGER
Indicates an imminent hazardous situation which,
if not avoided, will result in death, serious injury or
substantial property damage.
CAUTION
Indicates an imminent hazardous situation which,
if not avoided, may result in personal injury or
property damage.
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR INJURY TO PERSONS,
OBSERVE THE FOLLOWING:
1. Use this unit in the manner intended by the manufacturer. If
you have questions, contact the manufacturer’s distributor at the
address or telephone number listed on the front of the manual.
2. Before servicing or cleaning the unit, switch o at service panel
and lock service panel to prevent power from being switched on
accidentally.
3. Installation work and electrical wiring must be done by a quali-
ed person(s) in accordance with applicable codes and standards.
4. Follow the appliance manufacturer’s guidelines and safety
standards such as those published by the National Fire Protection
Association (NFPA), and the American Society for Heating, Refrig-
eration and Air Conditioning Engineers (ASHRAE), and the local
code authorities.
5. This unit must be grounded.
How to use this manual
This installation manual does not contain any system design
documentation. System design documentation is available from
ENERVEX.
Accessories and variable frequency drives are not covered by this
manual. Please refer to these component’s individual manuals.
Contents
1. Product information
1.1 Function ........................................................................3
1.2 Shipping ........................................................................3
1.3 Warranty ........................................................................3
2. Specications
2.1 Dimensions and capacities ......................................................4
2.2 Planning ahead .................................................................5
3. Mechanical installation
3.1 Transport safety device ..........................................................6
3.2 Prior to operation ...............................................................6
3.3 Single fan on steel chimney ......................................................6
3.4 Single fan on brick chimney .....................................................7
3.5 Multiple fans on steel chimney ..................................................8
3.6 Multiple fans on a brick chimney – oversized ue .................................8
4. Electrical installation
4.1 General .........................................................................9
4.2 Connection and wiring diagram for single fan with fan speed control .............9
4.3 Connection and wiring diagram for two fans with fan speed control .............10
4.4 Connection and wiring diagram for single fan with EFC211 ......................10
5. Start-up and conguration
5.1 System testing .................................................................11
5.2 Testing replace or stove .......................................................11
5.3 Testing pizza oven ..............................................................11
5.4 Operating replace and stove ..................................................11
5.5 Operating pizza oven ...........................................................12
6. Maintenance and troubleshooting
6.1 Care and cleaning ..............................................................12
6.2 Replacing wheel and motor ....................................................13
6.3 Chimney cleaning intervals .....................................................14
Notes .............................................................................15
2
3100153 RSHT009 - 016 2012-11-15