Specifications

5.5 Operating pizza oven
y Prior to starting a re, set the fan at high/full speed and start the re following the oven manufacturer’s instructions
or, in the absence of such instructions, normal instructions for burning a re in a replace or stove. After the re
catches on, after 3-5 minutes, reduce the speed of the chimney fan to a level where it safely removes the ue gases
and a perfect ame can be maintained.
y When adding wood to the re, it may be necessary to increase the fan speed for a short period of time.
CAUTION
Do not over-re the replace, stove or pizza oven. Small deposits of creosote could be ignited
and start a small chimney re which could cause the chimney ue to reach a dangerously high
temperature.
6. Maintenance and troubleshooting
6.1 Care and cleaning
The exodraft Chimney Fan is designed for prolonged use. The fan should be inspected at least once a year when the
chimney is inspected. Creosote and other deposits should be removed from the fan blades and the bottom of the motor
housing.
The top of the fan is hinged and can be opened in order to ease the cleaning.
WARNING
Do not open the motor housing unless power to the chimney fan has been disconnected.
12
3100153 RSHT009 - 016 2012-11-15