Specifications

3000270 05.12

Use

Code Compliance

Listing

1. Product Information

1.1 Function

  TheRSChimneyFanisachimneytopmountedventilatorthatisdesignedtoprovidelargeuegas  

  volumecapacities.Itisdesignedandintendedforusewithresidentialgasoroilredcentralspaceheating

systems, for volume water heating or for combination space heating/volume water heating. It is also suitable for

  usewithgas-redreplaces,stoves,BBQ’sorresidentialpizzaovens.

This product is developed to prevent draft problems from occurring by creating a mechanical draft in venting

  systemsandtherebyalsoincreasingthecapacityandefciencyofaventingsystem.

The use of the RS Chimney Fan is not restricted to any type of chimney, because the fan creates a

negative pressure (below atmospheric) in the chimney or vent.

Installations must conform to requirements of the authority having jurisdiction. Where required by the authority

having jurisdiction, the installation must also conform to the Standard for Draft Equipment and The National

Fuel Gas Code, ANSI Z223.1/NFPA 54.

All electrical wiring must be in accordance with the requirements of authority having jurisdiction or, in the absence of

such requirements, with the National Electrical Code, NFPA70.

The Model RS is tested and listed to UL Standard 378, Standard for Draft Equipment. The fan is

  manufacturedatanISO9001certiedplantandbearstheEuropeanCEcompliancelabel.

The chimney fan must be interlocked with the connected appliance(s) to insure proper combustions and to avoid

  uegasspillage.

1.2 Shipping

The packing list (attached to one of the packages) clearly lists all items in the shipment and each package has a

label showing the contents. Check the list against all materials on the job site for completeness.

NOTE:

All single phase fans are shipped with a capacitor and junction box connected via conduit. The capacitor is

located INSIDE the junction box. Please do not discard.

1.3 Warranty

ENERVEX products are warranted for a period of two (2) years following the date of invoice.

Replacement or repair will be at ENERVEX’s discretion, provided factory inspection shows a defect

in material or workmanship.

Complete warranty conditions are available from ENERVEX.