Data Sheet

Charging
• Refresh charge: Product in storage (ambient temperature
25°C) requires a top charge every six months. Apply constant
voltage at 2.40 volts per cell, initial charging current should
be set at less than 0.1C for 15 to 20 hours.
Discharge
• Stop operation when voltage has reached the minimum
permissible voltage (1.6Vpc). Recharge immediately.
• Do not operate at 3C or more current continuously.
Storage
• Always store battery in a fully charged condition.
• If battery is to be stored for a long period, apply a recharge
every 6 months.
• Store batteries in a dry and cool location.
Temperature
• Keep within ambient temperatures of -15ºC to +50ºC for both
charging and discharging.
Incorporating battery into equipment
• Encase battery in a well ventilated compartment.
• Avoid installing battery near heated units such as a
transformer.
• House the battery in the lowest section of the equipment
enclosure or rack to prevent unnecessary battery temperature
rise.
• It is not recommended to install/operate the battery in the
inverted position.
Others
• Avoid terminal short circuit.
• DO NOT expose to open f ame.
• WARNING - Avoid exposure of the battery to any type of oil,
solvent, detergent, petroleum-based solvent or ammonia
solution. These materials could potentially cause permanent
damage to the battery box and lid and will void the warranty.
INCH = MM
0.472 11.99
0.250
0.236 5.99
0.187 4.75
0.130 3.30
0.079 2.01
0.020 0.51
Terminal Illustration
Layout Illustration
43 2 1
7
89
6
5
INCH = MM
0.250
0.187 4.75
0.124 3.15
0.098 2.49
0.059 1.50
0.031 0.79
0.020 0.51
0.004 0.10
INCH = MM
0.250
0.098 2.49
0.059 1.50
0.031 0.79
0.020 0.51
0.004 0.10
INCH = MM
0.530 13.46
0.420 10.67
0.310 7.87
0.230 5.84
0.160 4.06
INCH = MM
0.870
0.550
0.430
0.230
INCH = MM
0.860 21.84
0.530 13.46
0.430 10.92
0.295 7.49
Camcorder Terminal D
Note:
Dimensions are in millimeters (mm)
Toleranc e s
a
r
e:
±
0.5 mm
for dimensions < 5mm
±
1.0 mm
for dimensions 5mm
Faston Tab: 187 A
Faston Tab: 187 B Faston Tab: 250 C
M6 Threaded Receptacle GM5 Threaded Receptacle E
JST No. VHR-2N F H
Tyco. 1-480318-0 I
≥
6.35
6.35
0.124 3.15
6.35
22
14
0.25
6.35
0.180
0.250 ± .004
0.059
0.020
0.031
0.098
0.250
0.236
0.472
0.250 0.079
0.187
0.020
0.130
0.187 ± .004
0.059
0.250
0.098
0.124
0.020
0.031
0.87
0.23
0.43
0.55
0.53
WIRE AWG≠20 UL 1007
JST SVH-21T-P1.1
JST VHR-2N
(TERMINAL)
0.42
0.23
0.16
0.31
.430
1
2
.880
.295
.530
NP