Information

CYCLON
®
battery standard descriptions
CYCLON
®
battery cells are ideal for small ampere-hour
applications up to 25Ah. The sealed-lead construction
uses a starved-electrolyte system and a patented
grid-alloy providing numerous advantages.
Standard batteries are offered based on combinations of
the previously described CYCLON
®
battery cells and are
available in 6 and 12 volt configurations with capacities
ranging from 2.5Ah to 25Ah.
Battery Packages
Rigid plastic cases or shrink wrap packaging are available.
Rigid Plastic
Cases are available for most designs in either flame-retardant
ABS material, meeting UL 94V-0 flammability rating, or
Styrene (available only in 2X3 D and X battery configurations).
Some cases have mounting holes. Rigid plastic cases
are recommended for applications in which the battery
must withstand vibration, movement or extreme weather
conditions.
Shrink Wrap
Shrink wrap packaging is less expensive and smaller in
size and weight. A plastic extrusion insulates the battery
top and keeps the cells in line. A heavy duty shrink sleeve
holds the cells firmly in place. Shrink wrap packaging is
recommended for applications in which the battery remains
stationary.
Battery Terminations for Single Cell and Monoblocs
Tab/Stud
Tab Adapters (D, DT, X, and E)
Available to convert 4.75mm tabs to 6.35mm tabs, 0.81mm
thick, and vice-versa.
BC Quick Disconnect Terminals
AMP series 250 Faston terminals are available for BC
batteries.
Connection Terminations
A wide variety of terminations are offered. For recommendations
or to specify; contact your EnerSys
®
Territory Manager or
battery assembler.
Fusible Links
Specify your requirement.
CYCLON
®
Battery Single Cell
Alternative battery configurations
Standard battery configurations are rectangular in
overall shape. A sample of other possible configurations
are illustrated below. These can be held together with
tape (offering the lowest cost and minimum electrical
and mechanical protection) or by shrink wrapping. The
CYCLON
®
battery Single Cell can be custom configured
in virtually an infinite number of designs.
Rectangular Rhomboid
Nested Trapezoid
Tubular Flat Pack
D 4.75mm x 0.64mm
DT 4.75mm x 0.64mm
X 6.35mm x 0.64mm
E 6.35mm x 0.64mm
J 7.92mm x 0.81mm
BC 6mm post (negative)
8mm post (positive)
Cell size Dimensions
9
Publication No: EN-CYC-SG-004 - June 2014
www.enersys-emea.com