User guide

4
5. Drive fork truck from the front into the frame assembly,
position forks under bolster, and raise the frame until it
contacts the press bed.
6. Insert angle-bearing assembly securely with
5
⁄8-11 X 1
3
⁄4"
bolts and washers. See Figure 6.
7. Tighten angle bearing assembly securely with
5
⁄8-11 X 1
3
⁄4" bolts and washers. See Figure 7 (A).
8. Secure P141 hand pump to left frame rail of press using
the hardware provided. See Figure 8.
9. Install tubing from P141 hand pump to mini-cylinders in
angle bearing assembly following tubing layout. See
Figure 9. Figure 10 (page 5) shows the correct P141
and left mini-cylinder connection.
Figure 6
Figure 7
Figure 8
Figure 9
A