User Manual

5.6 Using bearing puller attachment

The bearing puller attachment can be used in

combination with the crosshead puller shown in the

illustration 4 below and illustration 6 on page 8.

6.0 MAINTENANCE AND SERVICE

Maintenance is required when wear or leakage is

noticed. Periodically inspect all components to detect

any problem requiring service and maintenance.

Enerpac offers ready-to-use spare parts kits for

repair and/or replacements. Contact Enerpac.

IMPORTANT: Hydraulic equipment must

be serviced by a qualified hydraulic

technician. For repair service, contact the

Authorized Enerpac Service Center in

your area.

• Periodically inspect all components to detect any

problem requiring maintenance and service.

Replace damaged parts immediately.

•

Do not exceed oil temperature of 60˚C [140˚F]

• Keep all hydraulic components clean.

• Keep your pulling equipment in shape. Clean and

lubricate the puller’s adjusting screw and puller

legs frequently, from thread to tip, to ensure good

operation and long life.

• Periodically check the hydraulic system for loose

connections and leaks.

• Change hydraulic oil in your system as recom -

mended in the pump instruction sheet.

illustration 4 - Bearing puller attachment with

Crosshead Puller

Do not

exceed

50% of

rated capacity.