User Manual

11
12
13
17
19
2
4
14
15
3
Capacity
Grip Puller Attachments
BHP-1762
TABLE D - INDIVIDUAL COMPONENTS OF GRIP PULLER ATTACHMENTS
8 ton
BHP-252
20 ton
BHP-352
30 ton
BHP-552
50 ton
2
3
4
Grip Arms
HP-1125 (3x) HP-2125 (3x) HP-3125 (3x) HP-5125 (3x)
Double Crosshead
-- HP-2120 HP-3120 HP-5120
Triple Crosshead
HP-1130 HP-2130 HP-3130 HP-5130
12
13
14
15
Adjusting Rod
HP-1111 HP-2111 HP-3111 HP-5111
Strap Nut Kit
(includes 6 nuts)
HP-1123 HP-2023 HP-3123 HP-5023
Strap Screw Kit
(includes 6 screws)
HP-1122 HP-2122 HP-3122 HP-5122
Straps
HP-1121 (6x) HP-2121 (6x) HP-3121 (6x) HP-5121 (6x)
17
Threaded Saddle
-- HP-2015 HP-3015 HP-5016
19
Mounting Screw Kit
(includes 2 screws)
HP-1120 HP-2213 HP-2013 HP-5013
LEG LENGTHS (See item #11, tables B, C and E)
Leg Part Number
Leg Length
inch [mm]
Used on Puller Models:
HP-1136 4.2 [106]
BHP162, BHP-1752, BHP-1772
HP-1137 14.1 [357]
HP-2006 9.4 [240]
BHP-261G, BHP-2751G, BHP-262
HP-2007 16.5 [420]
HP-2008 22.4 [570]
HP-2012 4.5 [115]
HP-3036 8.0 [204]
BHP-361G, BHP-3751G, BHP-362HP-3037 18.1 [18.1]
HP-3038 28.0 [710]
HP-5007 24.0 [608.5]
BHP-561G, BHP-5751G, BHP-362
HP-5008 34.0 [863.5]
Note: Refer to
Illustration 5
(page 6)