Certifications 2

SAFETY DATA SHEET
DOWSIL™ TC-5121C LV Thermally Conductive
Compound
Version
4.0
Revision Date:
10/23/2017
SDS Number:
627925-00013
Date of last issue: 03/28/2017
Date of first issue: 10/11/2014
3 / 10
Environmental precautions
:
Discharge into the environment must be avoided.
Prevent further leakage or spillage if safe to do so.
Retain and dispose of contaminated wash water.
Local authorities should be advised if significant spillages
cannot be contained.
Methods and materials for
containment and cleaning up
:
Soak up with inert absorbent material.
For large spills, provide diking or other appropriate
containment to keep material from spreading. If diked material
can be pumped, store recovered material in appropriate
container.
Clean up remaining materials from spill with suitable
absorbent.
Local or national regulations may apply to releases and
disposal of this material, as well as those materials and items
employed in the cleanup of releases. You will need to
determine which regulations are applicable.
Sections 13 and 15 of this SDS provide information regarding
certain local or national requirements.
SECTION 7. HANDLING AND STORAGE
Technical measures
:
See Engineering measures under EXPOSURE
CONTROLS/PERSONAL PROTECTION section.
Local/Total ventilation
:
Use only with adequate ventilation.
Advice on safe handling
:
Handle in accordance with good industrial hygiene and safety
practice, based on the results of the workplace exposure
assessment
Take care to prevent spills, waste and minimize release to the
environment.
Conditions for safe storage
:
Keep in properly labeled containers.
Store in accordance with the particular national regulations.
Materials to avoid
:
Do not store with the following product types:
Strong oxidizing agents
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Ingredients with workplace control parameters
Contains no substances with occupational exposure limit values.
Engineering measures
:
Processing may form hazardous compounds (see section
10).
Ensure adequate ventilation, especially in confined areas.
Minimize workplace exposure concentrations.