Operation Manual

29
Using the Flash
The flash is designed to function automatically when lighting conditions warrant the use of flash. You can
take an image using a suitable flash mode to your circumstances.
1. Rotate the mode dial based on your desired scenery
(Auto/Program/Scene/Tv/Av/Manual) and power on your camera.
2. Press the [ ] flash button located on the rear side of the camera
repeatedly until your desired flash mode appears on the LCD
monitor.
When you toggle the [ ] flash button, the following are displayed
in the accordingly order:
[
A
] Automatic flash [
A
] Red-eye reduction [ ] Fill flash (on) [ ] Flash off
3. Compose your image and press the shutter button.