Operation Manual

18
E
F
S
G
Preparing Your Camera
Installing the Batteries (Optional Accessory)
You can use 2 AA size batteries to power the camera. Battery power is
convenient for capturing images or recording video clips.
1. Make sure your camera is off.
2. Slide the battery/SD card cover lock.
3. Insert the batteries according to the correct polarity marks (+ or -).
4. Close the battery/SD card cover lock firmly.
You may use a CR-V3 Lithium battery pack.
Avoid using batteries in extremely cold environments as low temperatures can shorten the battery life and
reduce camera performance. This low temperature will also influence Alkaline battery performance, therefore
Ni-MH rechargeable battery is highly recommended.
If you are using the new rechargeable batteries or rechargeable batteries that have not been used for an
extended period of time (batteries that pass the expiry date are exceptions) might affect the number of pictures
that can be taken. Therefore, to maximize their performance and lifetime, we recommend that you fully charge
the batteries and discharge them for at least one complete cycle before use.
If you will not be using the batteries for an extended period of time, remove them from the camera to prevent
leakage or corrosion.
Never use batteries of different types (together) or mix old and new batteries.
Never use manganese batteries.