User's Manual

2626
GETTING STARTED
1. We recommend making a full charge of the battery before first use. Connect the
eReader through the supplied USB cable to your personal computer.
2. We recommend that the first three charges of the battery are 12 hours each; with this
you will extend the battery life and will give you a longer time of use. The following
charges only will require about 5 hours to fully charge the battery.
3. Your eReader is powered by a special Li-ion polymer rechargeable battery. When
the battery becomes low, connect the reader through the micro USB cable to your
computer USB port.
The charging status is shown as below:
POWER ON/OFF
To power on your eReader press the POWER button for 2 seconds to start the device.
The first time you use your device or after a factory restore the language startup screen
will be displayed allowing you to select the language for the user interface.
battery low / charging / fully charged