User's Manual

2626
GETTING STARTED
1. We recommend making a full charge of the battery before first use. Connect the
eReader through the supplied USB cable to your personal computer or to AC/DC
charger (not included).
2. We recommend that the first three charges of the battery are 12 hours each; with this
you will extend the battery life and will give you a longer time of use. The following
charges only will require about 3 hours to fully charge the battery.
3. Your eReader is powered by a special Li-ion polymer rechargeable battery. When
the battery becomes low, connect the reader through the micro USB cable to your
computer USB port.
The charging status is shown as below:
bateria baixa / carregando / carregado
POWER ON/OFF
To power on your eReader press the POWER button for 2 seconds to start the device.
The first time you use your device or after a factory restore the language startup screen
will be displayed allowing you to select the language for the user interface.