User's Manual

3838
GETTING STARTED
1. We recommend making a full charge of the battery before first use. Connect the
ebook through the supplied USB cable to your personal computer (must be turned
on).
2. Your eReader is powered by a special Li-ion polymer rechargeable battery. When
the battery becomes low, connect the reader through the micro USB cable to your
computer USB port.
The charging status is shown as below:
3. Please handle the device with care to prevent damage to the display screen.
POWER ON/OFF
To power on your Color eReader the power switch must be on the ON position. Press the
power button for 2 seconds to start the device.
The first time you use your eReader the touch screen calibration process will be started.
After complete the calibration, the welcome message will be showed, please wait till the
process is complete.
battery low charging fully charged