Installation manual

Chart A: Baseboard Heated Home

Load Control Strategy: Combination Fixed/Rotate

Priority Shed Sequence Load Demand

1 (highest) Last Dryer (heating

elements only)

5.5 kW

2 Second Water Heater 4.5 kW

3 (lowest) First* Living Room Heat 3.5 kW

3 (lowest) First* Basement Heat 4.0 kW

3 (lowest) First* Entry Heat 1.5 kW

3 (lowest) First* Bedroom Heat 2.0 kW

3 (lowest) First* Family Room Heat 3.0 kW

Chart B: Typical Heat Pump/Air Conditioner Home

Load Control Strategy: Fixed Priority

Priority Shed Sequence Load Demand

1 (highest) Last Dryer (heating

elements only)

5.0 – 5.0 kW

2 Seventh Compressor #1 3.0 – 7.0 kW

3 Sixth Compressor #2 3.0 – 7.0 kW

4 Fifth Water Heater 4.5 kW

5 Fourth Strip Heat #1

Electric Furnace

5.0 kW

6 Third Strip Heat #2

Electric Furnace

5.0 kW

7 Second Strip Heat #3

Electric Furnace

5.0 kW

8 (lowest) First Strip Heat #4

Electric Furnace

5.0 kW

*NOTE: Shedding sequence of rotating loads begins with the load which has been

restored the longest. When all #3 priority loads are all shed, the #2 priority load is shed

next, #1 priority load is shed last, if necessary.