Specifications

QUICK-FILL SYSTEM OPERATION
and close the cylinder valve. Air pressure in the reg-
ulator will drop, and the leak will slow down.
c. Quickly replace the protective dust cap on the male
fitting. This will form a redundant seal.
d.Open the cylinder valve and return to fresh air
immediately.
2
. Preparing the Quick-Fill System for Storage:
a
. Press in on the center of the quick-disconnect dust
c
ap to release any pressure in the Quick-Fill System
hose.
b.Roll up the hose and place it in its protective pouch.
Note: Only persons trained in MSA Maintenance are
authorized to repair or disassemble the Quick-Fill System.
If repairs are required, contact your nearest MSA office.
Call 1-800-MSA-2222.
24
TAL 606 (L) Rev. 16 - 10023638