Datasheet
Chemical System:
Silver Oxide (Zn/Ag
2
O)
Designation: IEC-SR69
Nominal Voltage: 1.55 Volts
Typical Capacity:
34 mAh* (to 1.2 volts)
Capacity Test:
33K ohm continuous drain at 21°C
Typical Weight: 0.7 grams (0.023 oz.)
Typical Volume: 0.15 cubic centimeters (0.009 cubic inch)
Impedance (40 Hz): 10 to 20 ohms
Load Cutoff
1.2V
(ohm) (hours)
33K 748
Industry Standard Dimensions
ENERGIZER 371/370
Typical Performance at Low Discharge Rates
Temperature Characteristics
SILVER OXIDE
Specifications
Cross Section
* Varies according to the applied load, temperature, and cutoff voltage.
at 1.50V
(milliamperes)
Schedule
Typical Drains
©Energizer Holdings, Inc. - Contents herein do not constitute a warranty.
Important Notice
This datasheet contains typical information specific to products manufactured at the time of its publication.
Continuous
0.045
Typical Performance at 21°C (70°F)
mm (inches)
Typical Discharge Characteristics
9.50 (0.374)
9.25 (0.364)
0.03 (0.001) Minimum Ref.
(applies to top edge of gasket or
edge of crimp, whichever is higher)
3.80 (0.150)
Minimum
1.85 (0.073)
2.10 (0.083)
1.95 (0.077) Ref.
1.70 (0.067) Ref.
0.25 (0.010) Maximum Ref.
Permissible deflection from a flat
PRODUCT DATASHEET
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
0 200 400 600 800
Voltage, CCV
Service, Hours
Schedule: Continuous
Typical Drain @1.50V:
0.045 milliamperes
Load: 33K ohm
DESIGNED FOR USE ON CONTINUOUS LOW DRAIN
HIGH PULSE ON DEMAND
0
25
50
75
100
125
-20 0 20 40
Service (%)
Temperature (C)
Service Effects
60
70
80
90
100
0 2 4 6 8 10 12
Service (%)
Storage Time (yrs)
Storage Effects
40°C
20°C
0°C
Anode Cap
Gel Anode
Gasket
Can
Separator
Cathode
R0.64 (0.025) Ref.
Typical
For technical assistance, please e-mail:
Application.Support@Energizer.com
Form No. EBC - 4360-ZR Page 1 of 1