Datasheet
Chemical System: Silver Oxide (Zn/Ag
2
O)
Designation: ANSI-1175SO, IEC-SR60
Nominal Voltage: 1.55 Volts
Typical Capacity: 18 mAh* (to 1.2 volts)
Capacity Test: 100K ohm continuous drain at 21°C
Typical Weight: 0.37 grams (0.012 oz.)
Typical Volume: 0.08 cubic centimeters (0.005 cubic inch)
Impedance (40 Hz): 5 to 15 ohms
Load
Cutoff
1.2V
(ohm) (hours)
100K 1,200
Industry Standard Dimensions
ENERGIZER 364
Typical Performance at Low Discharge Rates
Temperature Characteristics
SILVER OXIDE
Specifications
Cross Section
* Varies according to the applied load, temperature, and cutoff voltage.
at 1.47V
(milliamperes)
Schedule
Typical Drains
©Energizer Holdings, Inc. - Contents herein do not constitute a warranty.
Im
p
ortant Notice
This datasheet contains typical information specific to products manufactured at the time of its publication.
Continuous 0.015
Typical Performance at 21°C (70°F)
mm (inches)
Typical Discharge Characteristics
PRODUCT DATASHEET
1-800-383-7323 / USA
1-800-383-7323 / CANADA
1-800-383-7323 USA/CAN
www.energizer.com
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
0 500 1000 1500
Voltage, CCV
Service, Hours
Schedule: Continuous
Typical Drain @1.47V:
0.022 milliamperes
Load: 68K ohm
DESIGNED FOR USE ON CONTINUOUS LOW DRAIN
HIGH PULSE ON DEMAND
0
25
50
75
100
125
-20 0 20 40
Service (%)
Temperature (C)
Service Effects
60
70
80
90
100
024681012
Service (%)
Storage Time (yrs)
Storage Effects
40 C
20 C
0C
Anode Cap
Gel Anode
Gasket
Can
Separator
Cathode
3.00 (0.118)
Minimum
2.15 (0.085)
1.90 (0.075)
2.00 (0.079) Ref.
1.75 (0.069) Ref.
0.13 (0.005) Maximum Ref.
Permissible deflection from a flat
0.06 (0.002) Minimum Ref.
(applies to top edge of gasket or
edge of crimp, whichever is higher)
6.80 (0.268)
6.50 (0.256)
R0.50 (0.020) Ref.
Typical
Form No. EBC - 4363-Z Page 1 of 1