Datasheet

Chemical System: Manganese Dioxide (MnO
2
)
Designation: ANSI/NEDA 1166A, IEC-LR44
Nominal Voltage: 1.5 Volts
Typical Capacity: 175 mAh* (to 0.9 volts)
Capacity Test: 6.8K ohm continuous drain at 21°C (70°F)
Typical Weight: 1.85 grams (0.07 oz.)
Typical Volume: 0.57 cubic centimeters (0.035 cubic inch)
Impedance (40 Hz): 5 to 15 ohms
Max Bulge:
This battery will bulge as it is discharged,
but will not exceed the maximum height
shown on the battery drawing.
0% 40% 80%
21°C (70°F) 1.55V 1.33V 1.20V
Important Notice
This data sheet contains typical information specific to products manufactured at the time of its publication.
Contents herein do not constitute a warranty and are for reference only.
Hours to 0.9V: 915
Hours to 0.9V: 915
(as percent of capacity)
Temperature
Typical Performance at 21°C (70°F)
Typical Performance at 21°C (70°F)
Load: 6.8K ohms - Continuous
Load: 6.8K ohms - Continuous
Typical Drain @ 1.30V: 0.191 mA
Typical Drain @ 1.30V: 0.191 mA
Industry Standard Dimensions
mm (inches)
* Varies according to the applied load, temperature, and cutoff voltage.
Cross Section
Typical Discharge Characteristics
Depth of Discharge
ENERGIZER A76
MINIATURE ALKALINE
Specifications
PRODUCT DATASHEET
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
0 200 400 600 800 1000
Voltage, CCV
Service, Hours
DESIGNED FOR ELECTRONIC APPLICATIONS
WHICH MAY REQUIRE HIGH RATE PULSES
Anode Cap
Gel Anode
Gasket
Can
Separator
Cathode
Form No. A76GL0619 Page 1 of 1