Information

00-IC-F0056-1 – Issue 22.0 Accredited by DANAK under registration number 7011 to certification of products. Page 1 of 2
This certificate may only be reproduced in its entirety and without any change, schedule included.
[1] EU-TYPE EXAMINATION CERTIFICATE

[2] Equipment or Protective System intended for use
in Potentially Explosive Atmospheres
Directive 2014/34/EU
[3] EU-Type Examination Certificate Number: DEMKO 19 ATEX 2277 Rev. 0
[4]
Product: Headlight, Model ISHD32
[5]
Manufacturer: Eveready Battery Co. Inc.
[6]
Address: 533 Maryville University Drive, P.O. Box 411460, St. Louis, MO 63141 USA
[7] This product and any acceptable variation thereto are specified in the schedule to this certificate and the documents therein referred to.
[8] UL International Demko A/S, notified body number 0539 in accordance with Article 17 of the Council Directive 2014/34/EU of 26 February
2014, certifies that this product has been found to comply with the Essential Health and Safety Requirements relating to design and
construction of products intended for use in potentially explosive atmospheres given in Annex II to the Directive.
The examination and test results are recorded in confidential report no
. 4789164095.2.1
[9]
Compliance with the Essential Health and Safety Requirements has been assured by compliance with:
EN 60079-0:2012+A11:2013 EN 60079-11:2012
EN 50303: 2000 EN 60079-28:2015
[10]
If the sign "X" is placed after the certificate number, it indicates that the product is subject to special conditions for safe use specified in the
schedule to this certificate.
[11]
This EU-Type Examination Certificate relates only to the design and construction of the specified product. Further requirements of the
Directive apply to the manufacturing process and supply of this product. These are not covered by the certificate.
[12]
The marking of the product shall include the following:
 I M1/II 1G Ex ia op is I/IIC T4 Ma/Ga
C
ertification Manager
Jan-
Erik Storgaard
This is to certify that the sample(s) of the Product described herein (“Certified Product”) has been investigated
and found in compliance with the S
tandard(s) indicated on this Certificate, in accordance with the ATEX Product
Certification Program Requirements. This certificat
e and test results obtained apply only to the product
sample(s) submitted by the Manufacturer. UL did not select the sample(s
) or determine whether the sample(s)
provided were representative o
f other manufactured product. UL has not established Follow-Up Service or other
surveillance of the
product. The Manufacturer is solely and fully responsible for conformity of all product to all
applicable Standards, speci
fications, requirements or Directives. The test results may not be used, in whole or in
part, in
any other document without UL’s prior written approval.
Date of issue:
2020-02-28
Notified Body
UL International Demko A/S, Borupvang 5A, 2750 Ballerup, Denmark
Tel. [phone]
65, [e-mail], www.ul.com