Data Sheet

AA
Classification: ACCU Rechargeable
Chemical System: Nickel-Metal Hydride (NiMH)
Designation: IEC-HR6
Nominal Voltage: 1.2 Volts
Rated Capacity: 1300 mAh (to 1.0 volts)
Based on 260 mA (0.2C) discharge rate
Typical Weight: 28.0 grams
Typical Volume: 8.3 cubic centimeters
Jacket: Plastic Label
0ºC to 40ºC
0ºC to 50ºC
Storage: -20ºC to 30ºC
Humidity: 65±20%
Rechargeable AA-1300 (HR6)
Industry Standard Dimensions
Internal Resistance:
The internal resistance of the cell varies
Specifications
(mm)
Value tolerances are ±20%.
with state of charge, as follows:
Cell 1/2 Discharged
Cell Charged
AC Impedance (No Load):
(tolerance of ±20% applies to above values)
30 milliohms
40 milliohms
Typical Discharge Characteristics
Above values based on AC current set at 1.0 ampere.
Discharge:
To maintain maximum performance, observe the following
(Charged Cell)
12
will significantly impact battery cycle life.
Contents herein do not constitute a warranty and are for reference only.
Operating at extreme temperatures,
The impedance of the charged cell varies
with frequency, as follows:
Frequency (Hz)
Impedance (milliohms)
1000
general guidelines regarding environmental conditions.
Charge:
Operating and Storage Temperatures:
Important Notice
This datasheet contains typical information specific to products manufactured at the time of its publication.
PRODUCT DATASHEET
Engineering Data
0.9
1.0
1.1
1.2
1.3
1.4
0 3 6 9 12
Cell Voltage
Hours of Discharge
Typical Performance at 21ºC
130 mA
(0.1C)
260 mA
(0.2C)
0.9
1.0
1.1
1.2
1.3
1.4
0.0 0.5 1.0 1.5 2.0 2.5
Cell Voltage
Hours of Discharge
Typical Performance at 21ºC
650 mA
(0.5C)
2.6 A
(2.0C)
1.3 A
(1.0C)
14.50
13.50
5.50
Maximum
50.50
49.20
7.00
Minimum
1.00
Minimum
Form No. HR6-1300EU0218 Page 1 of 1