Data Sheet

AA
Classification: Rechargeable
Chemical System: Nickel-Metal Hydride (NiMH)
Designation: ANSI-1.2H2 IEC-HR6
Nominal Voltage: 1.2 Volts
Rated Capacity: 2000 mAh (to 1.0 volts)
Based on 400 mA (0.2C) discharge rate
Typical Weight: 27 grams (0.95 oz.)
Typical Volume: 8.3 cubic centimeters
Jacket: Plastic Label
0ºC to 40ºC
0ºC to 50ºC
Storage: -20ºC to 30ºC
Humidity: 65±20%
ENERGIZER NH15-2000 (HR6)
Specifications
Industry Standard Dimensions
mm (inches)
Internal Resistance:
The internal resistance of the cell varies
with state of charge, as follows:
Cell Charged
Cell 1/2 Discharged
30 milliohms
40 milliohms
(tolerance of ±20% applies to above values)
AC Impedance (No Load):
The impedance of the charged cell varies
with frequency, as follows:
Typical Discharge Characteristics
Frequency (Hz)
Impedance (milliohms)
(Charged Cell)
1000
12
Above values based on AC current set at 1.0 ampere.
Value tolerances are ±20%.
Operating and Storage Temperatures:
To maintain maximum performance, observe the following
general guidelines regarding environmental conditions.
Charge:
Discharge:
Operating at extreme temperatures,
Important Notice
This datasheet contains information specific to battery chargers manufactured at the time of its publication.
Contents herein do not constitute a warranty and are for reference only
will significantly impact battery cycle life.
Engineering Data
0.9
1.0
1.1
1.2
1.3
1.4
0 3 6 9 12
Cell Voltage
Hours of Discharge
Typical Performance at 21ºC (70°F)
200 mA
(0.1C)
400 mA
(0.2C)
0.9
1.0
1.1
1.2
1.3
1.4
0.0 0.5 1.0 1.5 2.0 2.5
Cell Voltage
Hours of Discharge
Typical Performance at 21ºC (70°F)
1000 mA
(0.5C)
4000 mA
(2.0C)
2000 mA
(1.0C)
14.50 (0.571)
13.50 (0.531)
5.50 (0.217)
Maximum
1.00 (0.039)
Minimum
50.50 (1.988)
49.20 (1.937)
7.00 (0.276)
Minimum
Form No. NH15-2000GL0218 Page 1 of 1

Summary of content (1 pages)