User guide

Active insulin time
The active insulin time setting lets the pump know which active insulin time to use in calculating the
amount of active insulin to subtract before estimating a bolus. Your healthcare professional should
determine the active insulin time that is best for you.
To set the Active insulin time, do the following steps:
1 Make sure the EDIT SETTINGS screen is open.
Main > Bolus > Bolus Wizard Setup > Edit Settings
2 Select Active Ins Time, then press ACT.
3
The ACTIVE INS TIME screen appears. The default time of six hours flashes on the screen.
4
Set the number of hours for the active insulin time, then press ACT.
5 The EDIT SETTINGS screen shows the new Active insulin time setting. You have now completed the
Bolus Wizard setup. Press ESC or wait to see the message: Bolus Wizard setup is complete.
Review your Bolus Wizard feature settings
Check your Bolus Wizard feature settings in the REVIEW SETTINGS screen. If necessary, compare this
information with your information in the Bolus Wizard feature settings table.
1 Go to the REVIEW SETTINGS screen.
Main > Bolus > Bolus Wizard Setup > Review Settings
2 Scroll through the text to view your Bolus Wizard settings.
3 Exit the menus when you are done.
Meter option
You can set up your pump to automatically
receive your blood glucose reading from the
linked meter. This meter may not be
available in all countries. Check with your
local Medtronic Diabetes representative.
Your pump is set at the factory with the
Meter
BG readings
Using the Bolus Wizard feature 83
Chapter 6