User guide

13
Fixed prime
A fixed prime fills the soft cannula with insulin and is required after the infusion set is inserted into your
body and the introducer needle removed. The prime amount depends on your infusion set type, so read
your infusion set instructions for the fixed prime amount. A fixed prime is also required before
reconnecting the tubing to the infusion set to make sure that all air is removed from the tubing.
1 Go to the PRIME MENU screen.
Main > Prime
2 Select Fixed Prime and press ACT.
3 In the FIXED PRIME screen, enter the insulin amount for your infusion set type, then press ACT.
4 After the prime begins, the PRIME DELIVERY screen will count the units as they are delivered. The
pump will beep after priming is complete.
Prime history
Do these steps to see a list of the delivered primes.
1 Go to the PRIME HISTORY.
Main > Prime > Prime History
2 Scroll through the list of prime deliveries. The letter F at the end of the text line indicates a fixed
prime.
The letter M indicates a manual prime. Exit the menus.
Starting on insulin 69
Chapter 5