User guide

Basal programming and delivery
NOTE:
You cannot make changes to your basal rate settings while a percent temp basal is active.
To set your basal rates:
1 Go to the SET BASAL RATE 1 screen.
Main > Basal > Set/Edit Basal
2 The SET BASAL RATE 1 screen flashes the basal rate in U/H.
3 Enter your first basal rate amount and press ACT.
The start time for your first basal rate is midnight (00:00 or 12:00A) and cannot be changed.
4 The SET START TIME 2 screen appears. The dashes under the screen name flash. The first basal rate is
now set.
If you do not need a second basal rate for the day, press ESC. If you need to set up a second basal rate
for the day, follow steps 5 and 6.
5 In the SET START TIME 2 screen, enter the start time for the next rate.
6 Press ACT. The SET BASAL RATE 2 screen appears. Enter the rate.
7 Press ACT. The SET START TIME 3 screen appears. The second basal rate is now set. If you do not need
to set up any more basal rates for the day, press ESC and skip to step 9. If you need to set up more
basal rates, follow steps 5 and 6 for each basal rate.
8 After you program your last basal rate, press ESC.
9 The BASAL RATE screen will appear. Your basal rate(s) will now deliver as programmed. Exit the
menus.
10 When you have finished programming your pump, you can save your settings. Refer to the User
Settings section in the Utilities chapter for instructions.
Basic programming50