User guide

Alert and alarm icons
An open circle (alert) or a solid circle (alarm) are displayed in the upper part
of your pump screen only when there is an alert or alarm condition on your
pump. For alarm and alert information, see the Troubleshooting and alarms
chapter.
Scroll bar
If there is more text than the screen can show, a scroll bar appears in the right side of the screen. Press
to view any additional text.
Screen backlight
When you press from the HOME screen, the light on the screen turns on or off. During programming,
the backlight can be turned on by pressing the
and the together. The light will stay on while you
are pressing any of the pump buttons. It will stay on as long as the current screen is active.
To conserve your battery, the backlight will turn off automatically while the pump is vibrating. After the
vibration is finished, the light will turn back on. The backlight cannot be turned on in a Low Battery
condition.
Beep/vibrate
Your pump will beep or vibrate to indicate activity. Refer to the Setting your alert type section in the
Utilities chapter for setup instructions.
Operating modes
The screen lets you know when a special feature is active or if there is a condition that needs your
attention. The active features and pump status will determine the operating mode. The screens for the
three modes are shown below.
Alert icon
Alarm icon
The basics 31
Chapter 3