User guide

3 Reviewing remote IDs

a. Select Review ID, then press ACT.

b. The programmed IDs will show in the REVIEW REMOTE ID screen.

Exit the menus when you are done.

Block feature

Block restricts access to pump programming. The factory setting for this feature is off. Block is an

important safety feature if the pump user requires someone else to maintain complete control of pump

operation. When block is on, the remote control is used to deliver a bolus and suspend/resume the pump.

Direct pump programming is limited to suspend, block, and selftest. You can, however, still view status-

type screens (STATUS, BOLUS, BASAL REVIEW, DAILY TOTALS, etc.). Discuss what uses and settings are best

for you with your healthcare professional. (You can order the remote control from Medtronic Diabetes.)

Turning block on

NOTE:

The vibrate alert-type is disabled when block is on.

1 Go to the BLOCK OPTION screen.

Main > Utilities > Block

2 Select On, then press ACT. The HOME screen will appear with an open circle. The Block option is now

on and the pump is in Special mode. Exit the menus.

Example 1: Block

Nicholas is a very active toddler who wears a Paradigm pump. His parents don't want to worry that he

will play with the pump and accidentally change his programmed settings. They simply activated the

Block feature, and now, except for the Suspend and Self-Test, no other features are active when using

the pump buttons. When Nicholas needs a bolus, his parents and caregivers simply program it with the

Remote Control.

Utilities 119

Chapter 8