User guide

Use the button to deliver a Normal bolus at any time except during another Normal bolus. A Normal
bolus will temporarily interrupt a Square Wave or Dual Wave bolus that is delivering. After the Normal
bolus is finished, the Square Wave or Dual Wave bolus delivery will resume.
NOTE: If you want to use the pump-to-meter link, make sure the meter option is on. Refer to the
Meter option section in this chapter for instructions.
1 If you want a correction bolus, check your blood glucose with your blood glucose meter and go to step
2. If you want to bolus for food, go to step 2.
2
Press
on your pump, or go to the BOLUS MENU, select Use Bolus Wizard, and press ACT.
3 The ENTER BG screen will appear.
a. If you are NOT using the meter:
Enter your blood glucose value. Press ACT and continue to step 4.
If you are not entering a blood glucose and want to bolus for food, select the dashes in the ENTER
BG screen. The Bolus Wizard feature will calculate the insulin needed for your food entry without
considering your blood glucose level. Press ACT and continue to step 4.
b. If you are using the meter, your pump checks if the entered BG is within your target range.
NOTE: You must program your bolus within 12 minutes of the pump receiving the reading from the
meter. If more than 12 minutes have passed, the reading will no longer be available from the screen
and you must enter your blood glucose manually.
Press ACT to accept the Blood glucose value. You can change this blood glucose value, if
necessary, then press ACT. Continue to step 4.
4 The ENTER FOOD screen appears.
a. If this is a food bolus, enter the food value you will eat, then press ACT.
b. If this is a correction bolus, select 0 (zero) as the value, then press ACT.
5 The ESTIMATE DETAILS screen appears. Review the information in this screen. If you need to make any
changes, press ESC to return to the ENTER BG screen (step 3) and make changes as necessary.
6 Press ACT In the ESTIMATE DETAILS screen. The SET BOLUS screen appears with the estimated bolus
amount flashing. Change the amount if desired. Press ACT to accept and start delivery of the bolus.
NOTE: If you have BG Reminder turned On, a screen displays allowing you to accept or modify the
length of time after this bolus before you are reminded to check your BG. See the BG reminder
section in the Basic programming chapter for information about this feature.
Using the Bolus Wizard feature86