Operation Manual

User Manual
>> selection and setting of programs >> 024
!
If the hand pulse sensors can not accurately pick up a signal you
might receive the error message (“ERR“). Moisten your hands
lightly and start the program over.
You will get the error message also if you do not keep your hands
on the sensors during the calculation.
Age:
After entering the gender, AGE will blink on the display.
• Press the UP/DOWN keys until your correct age is displayed. To confirm the
setting press the SET-key.
Height:
After entering your age, HEIGHT will blink on the display.
• Press the UP/DOWN keys until your correct height is displayed. To confirm
the setting press the SET-key.
Weight:
After entering your height, WEIGHT will blink on the display.
• Press the UP/DOWN keys until your correct weight is displayed. To confirm
the setting press the SET-key.
The calculation starts
A
fter having entered all values the icon for the BMI-Body Fat Measurement
will blink. Start the calculation by pressing the function key ST/SP.
The calculation requires approximately 15 seconds. The display shows the
time remaining. When nished the readouts for BMI and body fat percent are
alternating on the display.
Attention: T
he hands have to be placed on the hand pulse sensors immedi-
ately after pressing the ST/SP-key and remain there until the values for BMI,
and your body fat percent appear on the display.
1
2
3
AGE
AGE
6
4
5
BMI, FAT %
WEIGHT
HEIGHT
WEIGHT
HEIGHT