Use and Care Manual

P a g e | 4
1. The heater can be tilted up to 25º using the Tilt Screw (#2).
Make sure the heater is not connected to a wall outlet before placing it where it will be used.
NOTE: wait until the heater heating element has cooled down before moving it.
REMEMBER, portable electric heaters are designed for spot heating or as a supplementary heat source. They are not
intended to be the main source of heat during cold months.
Caution: 1) If you must use an extension cord, the cord should be at least NO .14 AWG and rated for no less than
1875 W.
2) You must always make sure there is at least 1.5 ft/50 cm of empty space behind the heater, 25 cm
(9 inches) from the side to a wall and 180 cm (5 feet) in front of the heater.
3. OPERATION
1) Press the Heat On/OFF button on the panel control to operate the heater
To operate the heater with the included wireless remote control
1) Insert 2 AAA batteries (not included) into the remote
2) Press the Heat On/OFF button on the panel control to operate the heater
3) Press the light On/Off button on the panel control to open the DEL ambient lighting
2) Press the light On/Off button on the panel control to open the LED ambient lighting