User Manual
Page 6
What’s in the Enerdrive Lithium System?
To use the Enerdrive Lithium Power Pack you need to use a combination of items together. These are:
• The actual lithium power pack battery box including Active Balancing System.
• The Advance BMS controller board which includes
• The Advance BMS Relay Driver box
•
The ePRO Plus is our latest generation, highly advanced battery monitor. It consists of an intelligent
active shunt and a remote control and display unit (CDU). The shunt has a Grid Optimized footprint
for perfect integration with our DC Modular series of high current busbars and fuse holders.
The ePRO Plus battery monitor can measure DC currents up to 600Amps (500Amp continuous) and
voltages up to 70Vdc. So any lead- or lithium based battery from 12V up to 48V can be monitored.
•
A Blue Sea 500amp main battery latching relay which is activated by the ePRO Plus Battery Monitor
when the low state of charge (percentage is reached).
• A Class T Fuse for system protection.
• 70 - 120mm² Battery cable (depending on system) from the battery to the Connection Kit.
1 Left key (<) or Previous value
2 Menu or Enter key
3 Right key (>) or Next value
4
5 Alarm indicator
6 Selected battery input indicator
7 Value section for SoC (also for Function, Status and History parameter numbers)
8
discharge current (turning counter clockwise). The animation speed will also increase when the charge or discharge
current
clockwise) or a
increases.