Product Manual

62
APPENDICES
63
MORNINGSTAR CORPORATION
Appendices
DIP Switches Number 4,5,6 - Diversion Charge Control:
Battery Type PWM Switch 4 Switch 5 Switch 6
1 13.8 Off Off Off
2 14.0 Off Off On
3 14.2 Off On Off
4 14.4 Off On On
5 14.6 On Off Off
6 14.8 On Off On
7 15.0 On On Off
8 Custom On On On
DIV 13.8V
12345678
DIPON
DIV 14.0V
12345678
DIPON
DIV 14.2V
12345678
DIPON
DIV 14.4V
12345678
DIPON
O
N
OFF
DIV 14.6V
12345678
DIPON
DIV 14.8V
12345678
DIPON
DIV 15.0V
12345678
DIPON
Custom
12345678
DIPON
Figure 2.3 - Step 3 DIP Switches # 4,5,6
Select one of the 7 standard diversion charging algorithms, or select the “custom”
DIP switch for special custom settings using the PC software.
Refer to Section 6.3 for information describing the 7 standard diversion charging
algorithms.
Refer to Section 9.0 of this manual for battery charging information.
DIP Switch Number 7 - Select Diversion:
Switch 7
On
1234567 8
DIPON
O
N
OFF
Figure 2.3 - Step 3 DIP Switch # 7
In the Diversion Charge Control mode, DIP switch #7 must be in the ON
position.
DIP Switch Number 8 - Battery Equalization:
Equalize Switch 8
Manual Off
Auto On
Manual
12345678
DIPON
Automatic
12345678
DIPON
O
N
OFF
Figure 2.3 - Step 3 DIP Switch # 8
In the Auto Equalization mode (switch #8 On), battery equalization will
automatically start and stop according to the battery program selected by
the DIP switches 4,5,6 above. See Section 6.0 for detailed information about
each standard diversion battery charging algorithm and equalization.
In the Manual Equalization mode (switch #8 Off), equalization will occur
only when manually started with the pushbutton. Automatic starting of
equalization is disabled. The equalization will automatically stop per the
battery algorithm selection.
In both cases (auto and manual mode), the pushbutton can be used to start
and stop battery equalization.
NOTE: Confirm all dip-switch settings before going to the next installation steps.
REMARQUE : Confirmez les réglages de tous les commutateurs dip avant de passer
aux étapes suivantes d’installation.