Product Manual

58
APPENDICES
59
MORNINGSTAR CORPORATION
Appendices
DIP Switches Number 4,5,6 - Lighting Control Algorithm:
For Lighting Control mode, set the DIP switches 4,5,& 6 according to the table
below.
hrs hrs
after before
Sunset Sunrise Switch 4 Switch 5 Switch 6
6 0 Off Off Off
8 0 Off Off On
10 0 Off On Off
3 1 Off On On
4 2 On Off Off
6 2 On Off On
Dusk to Dawn On On Off
Custom On On On
6 hours
after sunset
12345678
DIPON
12345678
DIPON
12345678
DIPON
12345678
DIPON
O
N
OFF
12345678
DIPON
12345678
DIPON
12345678
DIPON
12345678
DIPON
8 hours
after sunset
10 hours
after sunset
3 hours
after sunset,
1 hour
before sunrise
4 hours
after sunset,
2 hours
before sunrise
6 hours
after sunset,
2 hours
before sunrise
Dusk to Dawn
Custom Settings
Figure 2.4 - Step 3 DIP Switch # 4,5,6
Select one of the 7 standard Lighting Control algorithms, or select the “custom” DIP
switch for special custom settings using the PC software.
The default LVD and LVD reconnect settings for Lighting Control are listed below. These
values can be changed in custom settings.
LVD 11.40 Volts
LVDR 13.00 Volts
DIP Switch Number 7 - Must be OFF:
Switch 7
Off
OFF
1234567 8
DIPON
O
N
OFF
Figure 2.3 - Step 3 DIP Switch # 7
In Load Control and Lighting modes, DIP switch #7 must be in the OFF position.
DIP Switch Number 8 - Lighting Control:
Control Switch 8
Lighting Disabled Off
Lighting Enabled On
Lighting
OFF
12345678
DIPON
O
N
OFF
Lighting
ON
12345678
DIPON
Figure 2.3 - Step 3 DIP Switch # 8
To enable lighting control, DIP switch #8 must be in the ONposition.
NOTE: Confirm all dip-switch settings before going to the next installation steps.
REMARQUE : Confirmez les réglages de tous les commutateurs dip avant de passer
aux étapes suivantes d’installation.