User Manual

Enerdrive ePRO Inverter / Charger Owners Manual
Page 42
EPC3000-12-120 / EPC3500-24-70
Parameter EPC3000-12-120 EPC3500-24-70
Inverter stage
Output power
1)
Pnom 2600W 2800W
P10minutes 3200W 3800W
Psurge 5000W 6500W
Output voltage / frequency 230Vac ± 2% / 50Hz ± 0.05%
Output waveform True sinewave (THD < 5%
1)
@ Pnom)
Input voltage (± 3% tolerance): Nominal 12V 24V
Range 10.5
2)
– 16Vdc 21
2)
– 32Vdc
Maximum eciency 92% 93%
No load power consumption
3)
[ASB] < 20W [3.5W] < 20W [4.0W]
Charger stage
AC input voltage 185 – 270Vac / 45 – 65Hz / PF > 0.95
Maximum continuous charging current
4)
(Sec.)
120A (4A) 70A (4A)
Standard charge voltage (bulk / oat @ 25°C) 14.3V / 13.3V 28.6V / 26.6V
Charge algorithm or program IUoUoP, intelligent 4 stage, temp. comp.
AC Transfer switch
Maximum continuous current 30Arms
Transfer time (typical) 0ms (inv. mains) / < 5ms (mains inv.)
General
ePROLink enabled Yes
Protections high/low battery voltage, high temperature,
overload, short circuit,
high ripple voltage and low AC input voltage
DC connections M10 bolt terminals
AC connections Screw terminals
Enclosure body size 370 x 431 x 132mm