User Manual

Enerdrive ePRO Inverter / Charger Owners Manual
Page 38
7. Technical Specications
EPC1600-12-60 / EPC1800-24-35
Parameter EPC1600-12-60 EPC1800-24-35
Inverter stage
Output power
1)
Pnom 1300W 1400W
P10minutes 1600W 1800W
Psurge 2500W 3000W
Output voltage / frequency 230Vac ± 2% / 50Hz ± 0.05%
Output waveform True sinewave (THD < 5% 1) @ Pnom)
Input voltage (± 3% tolerance): Nominal 12V 24V
Range 10.5
2)
– 16Vdc 21
2)
– 32Vdc
Maximum eciency 92% 94%
No load power consumption
3)
[ASB] < 10W [2.0W] < 12W [2.0W]
Charger stage
AC input voltage 185 – 270Vac / 45 – 65Hz / PF > 0.95
Maximum continuous charging current
4)
60A 35A
Standard charge voltage (bulk / oat @ 25°C) 14.3V / 13.3V 28.6V / 26.6V
Charge algorithm or program IUoUoP, intelligent 4 stage, temp. comp.
AC Transfer switch
Maximum continuous current 16Arms
Transfer time (typical) 0ms (inv.
mains) / < 5ms (mains inv.)
General
ePROLink enabled Yes
Protections high/low battery voltage, high temperature,
overload, short circuit,
high ripple voltage and low AC input voltage
DC connections Two wires, length 1.5 meters, 35mm2
AC connections Screw terminals