User Manual

Page 19
Enerdrive ePRO Inverter / Charger Owners Manual
Factory setting = ON
Models : ePRO Combi 2000-3500 only
Bypass remote switch (Bypasses the remote switch
connection when no remote switch is connected)
ON = Remote switch connection terminals are bypassed
OFF = Remote switch connection terminals are open.
A remote switch must be connected and switched ON
in order to activate the ePRO Combi. The local on/o
switch on the front panel always overrides the remote
switch. So in order to use the remote switch, the local on/
o switch must be in the on’ or charger only position.
CAUTION
1)
Invalid battery type settings can cause serious damage to your
batteries and/or connected battery loads. Always consult your batterys
documentation for the correct charge voltage settings.