User Manual

Enerdrive ePRO Inverter / Charger Owners Manual
Page 18
Factory setting = ON
Models : ePRO Combi 1600-1800
Bypass remote switch (Bypasses the remote switch
connection when no remote switch is connected)
ON = Remote switch connection terminals are bypassed
OFF = remote switch connection terminals are open. A
remote switch must be connected and switched ON in
order to activate the ePRO Combi. The local on/o switch
on the front panel always overrides the remote switch.
So in order to use the remote switch, the local on/o
switch must be in the on’ or charger only position.
Models : ePRO Combi 2000-3500
Ground switch/relay
ON = Ground switch is enabled
OFF = Ground switch is disabled
Factory setting = OFF
Models : ePRO Combi 2000-3500 only
Reserved