Brochure

combi
Universal Remote Control
The Universal Remote Control (URC) can be used to remotely
readout all available parameters from your ePRO inverter/charger
Combi, like charging current, output voltage, charge stage etc.
It is also possible to put the Combi in standby mode or to wake
it up again, besides being able to control the maximum charge
current and the maximum AC input current. All information is
shown on a clear white backlit graphical display. This kit comes
with mounting screws and a 3 meter interface cable (standard
cat5 patch cable). The URC automatically recognises to which
type of equipment it is connected.
Enerdrive Offers A New Innovative
Trigger-Action Feature For The ePRO
Combi Inverter / Charger Series
Add virtually unlimited control to your power system. The Trigger-
action feature enables you to assign certain events (triggers) to
user dened actions. You can for example congure the ePRO
Combi to perform an action when a certain voltage, current or
temperature level is reached, or perform an action when an
external switch is closed or opened. This oers great exibility
and may in some cases avoid the need to invest in additional
external hardware.
X
A few practical examples are :
X
Disable inverter mode using an external switch
X
Activate a relay when the charger enters oat mode
X
Stop charging using an external switch (i.e. from external
BMS)
X
Turn o an AC load when the inverter is overloaded
X
Only activate the transfer relay when the battery is almost
empty
X
Turn the AC Input boost function on or o depending
on generator or mains supply (recommended so that the
smart boost function does not run while connected to
mains AC).
* Programming kit required for setup of triggers; or speak to
Enerdrive at time of ordering.
Recreational vehicles
X
With a very small size footprint for power output, the
ePRO Combi is the perfect solution for tight installations.
Solar Power Systems –
X
Suitable for small back up sites that require variable
control capabilities with the innovative Trigger Switches.
Industrial Systems –
X
Any small commercial application can be congured to
use the ePRO Combi as a smart UPS system again using
the Trigger Switches.
Commercial work vehicles –
X
Provide ultra clean AC power for sensitive equipment.
Marine Systems –
X
Great charging capabilities from a small unit.
When installation space is at a premium, but maximum
performance is required then look no further than the ePRO
Combi range. With so many internal features the ePRO Combi
will provide you with all the requirements for on-board power
along with:
AC Input Power Boost – The ePRO Combi is capable of
temporarily assisting weak AC input sources when more power
is needed than available (i.e. from small generators). This is
benecial when larger loads than both the generator or the
inverter on their own could support; so let the ePRO Combi
combine both of the AC sources for maximum load support
capability.
AC Input Current Limit – For those times when you have limited
AC supply (i.e. portable generators), you can set the ePRO Combi
to only charge at a maximum rate.
Alarm Output Relays – Providing full conguration options for
the alarm contacts PLUS convert external trigger commands into
a number of ePRO Combi status changes.
Also available on the larger 2000-3500w Combi’s are two fully
congurable 16A 230v alarm relay outputs for controlling large
AC loads like air conditioning. Along with two unique trigger
inputs, it gives the end user virtually unparalleled control of
their Enerdrive ePRO “Power Station”.
The ePRO Combi Is The Perfect Inverter / Charger Solution
To Suit Markets Such As: