User Manual

Section 3 - Discharging (using the battery)
www.enerdrive.com.au Page 6
The Enerdrive B-TEC Lithium Battery can deliver a maximum of 200 Amps for 30 minutes due to the high
power, high quality Battery Management System (BMS) and prismatic Lithium cells inside the battery.
For this to happen, you MUST USE cable of the correct guage.
These are recommended wire guages and approximate current specifications for cable lengths shorter
than 1-2 meters:
Guage 2 35mm² 100 Amps
Guage 0 50mm² 150 Amps
Guage 00 70mm² 200 Amps
A 2000W inverter will draw approximately 170-180 Amps through the cables connected between it and the
battery - this will NOT be achieved with undersized wire.
Consider current like plumbing...
The thicker the pipe (cable) the more current can flow through it.