ePOWER Battery Charger Manual

Model EN31220 EN31240 EN31260 EN32430EN312100
Cooling Forced air ventilation
Temperature Setting Low, Normal, High (no sensor connected)
Battery Temperature
Sensor Port
RJ12 (standard battery temperature sensor supplied)
Digital Display Port RJ12 (optional display panel available)
Display:
LCD Display Backlit display. Charging status, Battery Voltage and Output Current
Warning and Fault Code Shown on display
AC Input and DC Output Connection:
AC Input Connection IEC with Supplied 1.2M Power Lead
DC Output Connection 6mm Screws 8mm Studs 6mm Screws
DC Output Ground Single Heavy Duty Common Ground Stud. 6mm ring terminals.
Environmental and Operating Temperature:
Storage Range -40° to 70° C
Operating R
ange -20° to 60° C
Humidity 5-95%, RH non-condensing
Ingress Protection
IP32 - Protected against solid objects over 2.5mm
and water sprays up to 15º from vertical.
Base Unit Weight and Dimensions:
EN31220 2.4 Kg / 295 x 206 x 86 mm
EN31240 2.6 Kg / 295 x 206 x 86 mm
EN31260 / EN32430
EN312100
4.0 Kg / 356 x 206 x 99mm
6.4 Kg / 425 x 236 x 102.7mm
Optional Accessories: Remote Digital Display / Enerdrive Part Number EN3REM
Regulatory Compliance: Complies with AS/NZS 60335.2.29 Including Australian deviations.
Page 36 Enerdrive Battery Charger Owners Manual Rev. 5.4